Rattler 369D Guide d'installation télécharger pdf (Page 31)

To determine what bypass module your vehicle requires, check

your web vehicle information sheet.

step 10

Mounting the receiver/antenna

The best location for the receiver/antenna is centered high on

either the front or rear windshield. For optimal range, the

antenna should be mounted vertically. It can be mounted hori-

zontally in relation to the windshield or under the dashboard

away from metal, but range will be diminished. Metallic window

tint can also affect range, so this should be a consideration when

determining the mounting location.

After determining the best mounting location, follow these

steps:

1. Clean the mounting area with a quality glass cleaner or

alcohol to remove any dirt or residue.

2. Plug the receiver/antenna cable into the receiver/antenna.

3. Mount the receiver/antenna using the supplied double-

sided tape.

4. Route the receiver/antenna cable to the control module and

plug it into the four-pin antenna connector.

important! To achieve the best possible range, DO NOT

leave the antenna cable bundled under the dash. Always

extend the cable its full length during installation, regard-

less of the antenna mounting location.

➜

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 62 63

Pas de commentaire

Rattler 369D Guide d'installation Page 31