Rattler 369D Guide d'installation télécharger pdf (Page 23)

Using the web information on the vehicle, locate the suspected

wire and place the red lead of the meter to a constant (+)12 volt

source and secure it. Place the multi-meter in the DC position.

Using the black lead of the meter, probe the wire. With the

switch in the off position the meter will read 0.00 volts. While

watching the meter, turn the switch to the parking light posi-

tion. The meter will read between 10.00 volts and 13.00 volts.

Once you have identified the correct wire, solder the WHITE

wire on the main connector to it and cover the connection with

electrical tape.

step 6

Door locks

When attempting to interface the power door locks with your

system it is important to understand that there are multiple types

of door locking systems in today's vehicles. To determine your

vehicle’s power door lock system, check the web information on

your vehicle.

➜

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 62 63

Pas de commentaire

Rattler 369D Guide d'installation Page 23